Wharfedale Pro DP2200N Power Amplifier 1x9520W @4Ohm with FIR Filter
Wharfedale Pro DP2200N Power Amplifier 1x9520W @4Ohm with FIR Filter
For Wholesale Enquiries Please Contact Us On WhatsApp
This is our wholesale website, for retail purcahses please visit our retail website MusicMajlis.co
Note - It is imperative to use the Wharefedale Pro SC48FIR DSP with any Wharfedale Pro WLA Series Line Array. This is part of a system. We recommend contacting our sales team for a full system design.
KEY FEATURES
- Huge Class D power in a 1U rack
- 4 discrete amplification channels
- Internal DSP and computer control
- Stable down to 2 Ω. Drive multiple speakers or line array elements
- FIR filtering with 512 taps
- 90 V to 260 V AC working voltage
- Dante ™ connectivity
- 70 V / 100V compatible models
- Power Factor Correction for increased efficiency
DESCRIPTION
TAKE CONTROL
Harnessing the power of the internal DSP. The supplied editing software gives a practical overview of all system parameters and DSP features within the DP-N amplifier. It is simple to monitor and edit the DP-N remotely.
REDUNDANCY
DP series amps get used in ‘mission critical’ environments. Therefore the ‘auto’ mode has been built in to deliver redundancy capability.
Set the input to ‘Auto’ and the input will change, should a problem happen with external connections. (Use of an internal delay is advised to compensate for any switch timing and latency issues)
SPECIFICATIONS
Output RMS voltage | 126.5 V | |
Maximum Input Level | +21 dBu | |
Amp gain | 35 dB | |
THD+N | Typical value:0.05%(10% Rated Power,8 Ω) | |
Cross-Talk | ≥90 dB(20 Hz-1 KHz,Below Rated Power,8 Ω) | |
Frequency Response | Typical value:+0,-0.5 dB(10% Rated Power,20 Hz-20 KHz,8 Ω) | |
Input Impedance | 20 kΩ(Balanced),10 kΩ(Unbalanced) | |
Damping Factor | ≥1000(20 Hz-200 Hz,8 Ω) | |
SNR | ≥105 dB (Default Gain, A weighted,20 Hz-20 KHz,8 Ω) | |
Main Power | 90~260 VAC,50/60 Hz |